Silent Generator

Posts Tagged ‘About’

If anyone want to sell his Natural Gas generator then tell me specifications and price for further proceedings.

One of the best contributions of the modern society to people is the Silent-Generator. People all over the world are experiencing power shortage because of several reasons.  In some countries, the energy supply is not enough to meet the needs of the whole country.  Some countries just have extreme natural conditions that destroy the line or the equipment that distributes power to the whole place.  Yet, whatever the reason for the power shortage a country has, power generators are undeniably useful to mankind.

The comfort and convenience that the electricity gives us is of course immeasurable and when there’s power outage, a domino effect can be felt.  This is the reason why Silent-Generator were invented.  However, for most people who are aware of the features of power generators, these are very noisy and disrupt the lives of the people.  Some people even consider this power generators are contributors to the noise pollution in the community.  In such case, the rise of silent generator has been embraced by people.

When we say silent generator, it refers to those generators which reduced noise or those which are silent at all.  Especially in residential areas, people in the neighborhood complain about the noise that is given off by the power generators.  Some people just opt to buy materials that can reduce the noise by the generators but these materials are naturally expensive.

A generator powered by wind is considered as a silent generator.  This generator uses a turbine that generates power from the strong winds in the environment.  Unlike those Silent-Generator that are fueled by diesel or gasoline, this wind generator uses propane that doesn’t give out noise. However, looking for this silent generator might not be easy because there are so many brands of generators in the market.  In such case, it is better to ask around from your friends on the kind of generator to buy.

Once your choices have already been narrowed down based on the recommendations of people around you, it is time to canvass generators from one shop to another.  Buying a generator right away might not be a good idea.  For some reasons, it is important that you test the generator and listen to the noise that it gives out.  Although considered as silent generator, some products that are badly manufactured are still noisy. Since noise is the main concern, choosing the most silent one can at least live up to your objective of not contributing to the noise pollution in the society.

Generators vary in terms of performance. There are some types of generators who are more efficient than the others. Don’t you know that there is a certain type of generator called the Silent-Generator? Technically, there is no such thing as a generator since silent means no sound at all. Silent generators have less noise than the typical generators.

For bigger and better quality generators, it is almost impossible not to have the sound at all. However, silent generators are made of materials used to reduce the produced sound coming out from the equipment. The manufacturing companies use different sound-reducing techniques to help reduce sound while boosting the generator’s performance. Some of the sound-absorbing materials are incorporated with the inside of the Silent-Generatoror an add-on to the design to keep the sound from leaking, thus enabling the generator to function with less noise.

Residential generators require the silent types. Since parents are very particular with the solemnity of the household, it would be inappropriate if you hear the rumbling and irritating sound of their generators for hours. Home should be a peaceful, quite, and conducive place for rest. It will not be considered peaceful if the generator keeps running with rumbling sound with it. It is an inconvenience to our part if we went home from work, we are really tired, electricity is out, and all of a sudden, we could hear an irritating sound from our generator.

Business establishments such as churches, review centers, and huge department stores also require generators. Noise is a kind of distraction. It might distract students, or even just shoppers. The customer’s impression is very important for hug department stores. Having a silent generator means efficiency with regards to customer service, while maintaining the balance between performance and standards.

At some point, they deem it as an advantage to have a silent generator because of its efficiency and standards. Huge businesses require stainless generators with optimum performance. At some point, marine vehicles require a soundless generator as well. It is quite a requirement to enable smooth and noiseless travel. Generators require fuel, and a silent generator is not an exception. The difference in terms of energy consumption for silent and non-silent type is minimal.

The silent generator is more efficient compared with the non-silent ones because of its ability to suppress sound leakage. Shoppers are not particular whether they buy a noisy or soundless one. Most of the time, they prefer the conventional ones. They will not realize the importance of the soundless equipment until they have some few weeks of using it. They will realize that it is to their disadvantage for buying the sounding generator.

Well, it is always wise to do a research before buying a quality generator. It is always healthy to get a grip of the basic specs of the equipment before taking it. We always have to make sure that we are getting the most out of our money and getting the Silent-Generatorinstead of the regular one is a wise decision.

In accordance with Honda’s recommendation, we are one of the few companies to make sure that their NEW Honda Generators are tested (PDI), before they are dispatched. Remove the NEW generator from the box, we start and test it. This is done to give you the confidence that, after receiving your order, you would not encounter any problems.

Control Panel: The NEW Honda Generators are equipped with a “Standard’ digital/LCD control panel. Included in this control panel are all the controls, safety devices and displays, which are required for operating it safely. Also displayed on the control panel are certain values or indicators. Illumination of the control panel is provided on almost all models.

Enclosures: Steel panels and locking doors on a modular structural base frame are used to build weather and soundproof enclosures. A rock-wool layer of insulation included in sound enclosures, accomplishes with the sound attenuating elements, and also complies with the prevailing regulations. A hot ambient air extraction fan is an additional element in the enclosures.

Silencers: Industrial type silencers, which are shipped loose, have been included in ‘Open set’ versions. Likewise, mounted critical type silencers, with a flexible connector, are included in ‘Enclosed’ versions. The Silencer/Muffler Product Option window helps in selecting ‘Critical’ silencers, which are optional on open sets and check out.

Fuel Tanks: An economical fuel use of 0.95 gallons at 1/2 load is another feature of the NEW model. On a full tank, the generator can run for over 105.3 hours. Product Options listed at hondageneratorstore also indicate the availability of single walled (non UL) and double walled (UL) tanks. The day tank, which is a normal provision, is removed in case base tanks have been added. To make the generator a complete operable unit, installation, fuel level gage and fuel line piping are included in tank prices. On special request, special tank versions, with stub up voids, can also be made available.

Transfer Switches: In these generator sets, it is the automatic transfer switch that effectively monitors utility and generator power. In the case of failure or unsatisfactory utility power, the generator set is started, the generator speed and voltage output are checked and the load is transferred to the generator set. As soon as utility power gets restored, the transfer switch automatically gets transferred back to utility power.

For optimum results, a transfer switch of either the same size, or a larger one, in amps than the building service or sub-panel should be selected. This has also to be borne in mind in the case of the relation between transfer switch and the maximum output of the generator that you have selected. Different types of fuel are required for running standby generators and portable generators. In some models, tri-fuel or dual-fuel configurations allow them to switch from natural gas or propane to gasoline, with the use of a hose. With this aspect in mind, a consumer should purchase a generator after determining the type of fuel that is available in his area.

There are no two ways about the fact that generator set is a piece of equipment that is worth every penny spent, and that it will easily run the whole house in case of utility power failure.

The U.S. construction industry complies with national model and local building codes. The importance of code was highlighted during the tragic events in Italy in early 2009.  A Reuters article blamed “less than scrupulous respect for anti-seismic building codes” for the collapse of a hospital built in the year 2000 in the region. Similarly, if you compare the number of car crashes on the news daily to the number of fires, and you also get a sense of just how effective and necessary these codes are.  Unfortunately, building designs optimized for fire safety often work against good acoustical performance. In other words, fire and sound aren’t usually building compatible.

When designing for quiet, the industry often references the Gypsum Association Fire Resistance Design Manualto determine the best way to create noise reduction for occupants while still keeping the design in compliance with fire codes.

The Gypsum Association’s publication references the industry’s most pervasive noise control requirements, Sound Transmission Class (STC) Ratings, as a way to determine the success of noise damping design.  The generally accepted rule is that the higher the STC Rating, the better the design.  In many cases, model building code dictates an STC Rating of 50 or higher.  For designing adequate noise proofing, when it comes to STC ratings, there aren’t a lot of other measurement options or guidance on the right level to target.

Understanding STC Ratings

But as an industry, we need to consider that much of the foundation for the STC Ratings system is dated. Testing and lab results in the Gypsum Association’s manual are more than 40 years old.  The STC Ratings system was developed post WWII for typical household noises such as conversation, dishwashing, and music from a radio. It takes into account frequencies down to 125 Hz.  As machinery advanced, trucks grew, home theaters bloomed, and subwoofers became ubiquitous, noises below 125 Hz became common and STC Ratings are now less an indicator of quiet.

In order to best understand how to maximize the value of STC Ratings, it is helpful to understand how STC is calculated for a particular wall assembly. The STC value is a calculation based on the ASTM Standard E90. STC is somewhat like how the EPA calculates the miles per gallon performance of vehicles. Even though the sticker may state “28 MPG”, results will vary based on speed, driving situation and vehicle condition. If you have one gallon left in your car, and the nearest gas station is 27.5 miles away, chances are, you’re not going to risk the drive.

Similarly, STC Ratings are not the most precise way to measure sound damping, but it gives a usable scale. However, if you want to address noise in a particular frequency range (i.e., low frequencies or high frequencies), it is smart to consult the actual transmission loss (TL) curve to identify exactly how the wall assembly performed in those frequencies. This will let you predict more accurately the results you can expect from the assembly in your project. STC value calculation ignores TL below 125 and de-emphasizes frequencies 500 Hz and below.  If your project will need to control noise at these frequencies, the calculated STC value would not be a particularly valuable criterion for predicting the performance of an assembly for your project.

Another potential complication is that a variable of less than 5 STC points either way doesn’t make a huge difference in how people hear noise. Even if you’ve designed for an STC rating, STC Ratings of 50 in the lab generally get built to 45 in real life.  Let’s say your design is 3 STC points short of meeting code, you may change that design to comply with code. The technical requirements will be met, but the owner or occupants may not experience the expected “comfort.”

The most noticeable changes of STC Ratings are greater than 5, and a 10 point difference can be like turning off sound to the human ear.

The Institute for Research in Construction conducted a study that found the point at which sound insulation starts becoming effective is approximately STC 55, or to put it even more simply, STC 55 makes people happy.  If we design for an STC 60, it follows that as an industry we will end up with an STC 55 in the field.  But STC 60 doesn’t happen with traditional wall construction.  To get to STC 60, builders need an acoustical consultant or other field expert to help.

Noise Reduction Design Solutions

Experts can help determine the best way that sound transmission control solutions could work for your project. For example, one common method is to add mass; another is to use structurally independent leaves. When working with mass law, each time you double up a layer of similar mass material, you can gain up to 6 STC points. This principle works on that fact that the heavier an object is, the more energy it takes to vibrate it. Movie theaters have used this design process for years, some walls between screens are up to 3 feet thick with many layers of concrete block and then faced with multiple layers of drywall–sometimes 16 to 20 layers on each side of the CMUs . Structurally independent leaves work by separating the sound control from the structure.

Another method uses damped layer panels. Damping technology is not new. It has been used in planes, trains and automobiles for years to increase cabin comfort. It hasn’t been used in construction until recently due to many factors. It can be a messy process, end results are not ascetically pleasing, or it could not package in either in an easily usable form or application methods would be difficult. In the past few years, however, solutions that are easy to use, reliable and ascetically pleasing are now available.

Caulking is an absolutely critical component of a high TL wall.  During building, a common occurrence happens when the contractor ran out of caulk as he was nearing the end of the job.  He may have had every intention of finishing but may have been distracted or forgot to come back to that spot. By missing that spot, the resulting STC is 10 points lower than specified.  The real problem comes into play at the time of occupancy because at this point, the performance is not being tested.

So far, we have focused on wall assemblies and code. It is important to note that controlling noise with floor and ceiling assemblies is another type of challenge. Floor and ceiling assemblies are rated on two independent codes: STC and IIC. You now know what STC measures airborne sound transmission. IIC stands for Impact Isolation Class and it measures structure-borne sound transmission.

IIC is calculated similarly to how STC is calculated with a number of values resulting from tests at various frequencies. However, there is some dissatisfaction with the IIC measurement today. Some of the most common complaints about noise involve what is often called “high heel” noise, which occurs at high frequencies. Many experts believe that the current IIC measurement under-weighs high frequencies, so that a high-IIC floor/ceiling assembly will not always solve the problem of “high heel” noise.

We expect that a growing movement to modify how the calculation is made will soon effect changes that will allow IIC to provide values that more closely fit builders’ expectations.

Another, sometimes overlooked, way to help with sound control simply has to do with orientation within the environment.  You can use the features of the surrounding rooms to assist in lowering sound transmission.

How the ductwork runs are done can have a dramatic impact. Sound will take the path of least resistance. Some fairly typical designs provide a direct pathway for sound to travel from room to room. A better way would be to run ducts along a hallway and then trunk them in and out of each room.

Just like the previous example door orientation can make it easy for sound to travel between rooms. Locating doors away from each other or diagonally opposed will definitely help.

Code Plus Design for True Value

A perceived savings by engineering for “value” up front could lead to an added liability exposure to all involved. Plans are developed without considering acoustical function of space. Noise issues are not realized until there is occupancy and then there is usually no budget set aside for remediation.

An upfront investment to consider acoustical function can generate a serious return on investment.  Noise mitigation costs 10% as much at the design phase rather than the build phase. In other words, delaying the design of noise mitigation until the build phase can increase the cost of implementation by 10 times.

Most all of us are affected by noise or sound in and around our buildings. The best designs incorporate sound management into the overall design solution. Acoustics needs to be not only considered but incorporated at the very start of a design project—just as other building sciences are utilized during the design phase.

Today, I would urge acoustical designers to use STC Ratings and other codes as a tool to use as a general indicator of ‘goodness’ but not a detailed picture of owner satisfaction. The ultimate proof is in the performance of a wall, and that usually means implementing an overall acoustic design at code plus.

Posted in Info | Tags: About, Design, gypsum association, household noises, Italy, noise, quiet, Ratings, sound transmission class, STC, U.S. | No Comments »